ATZ # : RMT-121

Dãi đo : 0  to 200 NTU Dùng kết hợp với transmitter Rosemount  model 1056 

ATZ # : RMT-110

ATZ # : RMT-109

ATZ # : RMT-120

ATZ # : RMT-121

ATZ # : RMT-122

ATZ # : BON-108 Range : 0  to 200 NTU

ATZ # : RMT-121 Measurement : pH / ORP

ATZ # : RMT-123

ATZ # : RMT-542 - pH/ORP Sensor

ATZ # : RMT-123 Measurement : pH / ORP

ATZ # : RMT-543 - pH/ORP Sensor

ATZ # : RMT-150

ATZ # : RMT-124

ATZ # : RMT-119

ATZ # : RMT-544 - pH/ORP Sensor

ATZ # : RMT-151

ATZ # : RMT-125

ATZ # : RMT-545 - pH/ORP Sensor

ATZ # : EH-1384 Approval: Non-hazardous area Cable Length: 10m Cable Connection: Wire terminals

ATZ # : EH-1383 Process Connection; Adapter: G1/2; 2x NV 1/2”

ATZ # : EH-1382 Approval: Non-hazardous area Application: Process water, drinking water Measuring Range: 20 mg/l Accessory Mounted: Adapter, CCA151

ATZ # : WTW-1381 Chiều dài Cáp 7m Xuất xứ: Đức

ATZ # : WTW-1380 Nguyên lý đo: sử dụng phương pháp quang học tán xạ ánh sáng Dải đo: 0 - 4000 mg/l (hoặc tùy chọn) Phương pháp làm sạch: sử dụng sóng siêu âm để làm sạch Có chức năng kiểm tra sensor (sensor check): phát hiện bẩn cửa sổ đo quang, phát hiện lỗi hệ thống tự làm sạch Cửa sổ đo bằng saphire chống xước, đảm bảo kết quả đo chính xác ngay cả khi sử dụng lâu dài trong điều kiện môi trường nhiều cặn thô nhám Thân đầu đo bằng thép không gỉ: V4A 1.4571 Cấp bảo vệ: IP68  

ATZ # : RMT-161

ATZ # : RMT-160

ATZ # : RMT-152

ATZ # : RMT-126

The Valmet Conductivity instruments measure high and low conductivity using the 4-electrode principle. Designed for conductivity control in industries such as pulp, power, pharmaceutical, food, brewery, sugar and chemical.

ATZ # : RMT-177-1 Model 1055-02-10-21 đã ngưng sản xuất và được thay thế bằng model 1056-02-21-38-AN  với tính năng hoàn toàn tương đương. Vui lòng nhấn vào link để đến model thay thế.

The Valmet Conductivity instruments measure high and low conductivity using the 4-electrode principle. Designed for conductivity control in industries such as pulp, power, pharmaceutical, food, brewery, sugar and chemical.

ATZ # : RMT-177

The Valmet Conductivity instruments measure high and low conductivity using the 4-electrode principle. Designed for conductivity control in industries such as pulp, power, pharmaceutical, food, brewery, sugar and chemical.

The Valmet Conductivity instruments measure high and low conductivity using the 4-electrode principle. Designed for conductivity control in industries such as pulp, power, pharmaceutical, food, brewery, sugar and chemical.

The Valmet Conductivity instruments measure high and low conductivity using the 4-electrode principle. Designed for conductivity control in industries such as pulp, power, pharmaceutical, food, brewery, sugar and chemical.

4-electrode conductivity sensor with internal electrodes. Used with conductivity TCU series 3100 and 3300  

4-electrode conductivity sensor with external electrodes. Surface roughness of all wet parts Ra < 0.80 μm. Used with TCU series 3100 and 3300.

4-electrode conductivity sensor with external electrodes. Surface roughness of all wet parts Ra < 0.80 μm. Used with TCU series 3100 and 3300.

4-electrode conductivity sensor with external electrodes. Used with TCU series 3100 and 3300

4-electrode conductivity sensor with external electrodes. Surface roughness of all wet parts Ra < 0.80 μm. Used with TCU series 3100 and 3300

4-electrode conductivity sensor with external electrodes. Surface roughness of all wet parts Ra < 0.80 μm. Used with TCU series 3100 and 3300.

4-electrode conductivity sensor with internal electrodes. Universal flange for SMS38, DIN DN32 and 40 union. Used with TCU series 3100 and 3300

4-electrode conductivity sensor with external electrodes. Used with conductivity TCU series 3100 and 3300. Universal flange for SMS38, DIN DN32 and 40 union.

4-electrode conductivity sensor with internal electrodes. Suitable for  acetone applications. Used with TCU series 3100 and 3300.

4-electrode conductivity sensor with internal electrodes. Used with TCU series 3100 and 3300.

4-electrode conductivity sensor with internal electrodes (resistant to acetone). Used with TCU series 3100 and 3300

4-electrode conductivity sensor with internal electrodes and VARIVENT flange (clamp not included). Used with  TCU series 3100 and 3300.  

4-electrode conductivity sensor with external electrodes. Surface roughness of all wet parts Ra < 0.80 μm. Used with TCU series 3100 and 3300.  

4-electrode conductivity sensor with external electrodes. Surface roughness of all wet parts Ra < 0.80 μm. Used with TCU series 3100 and 3300.  

4-electrode conductivity sensor with internal electrodes. Used with TCU series 3100 and 3300